Change or rekey · Mississauga
Smart Lock Installation
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into. It needs to become yours, properly, or be replaced.
Call now · open 24/7(289) 805-7422In plain words
A smart lock fitted by a locksmith keeps a way in that works when the battery or network fails, a mechanical key on many models or an external battery contact on key-free ones. Most keypad deadbolts keep a conventional keyway, rekeyed during the visit so a fresh key operates it and the old one retires. Some models instead add small outside terminals where a nine-volt battery can wake a dead lock long enough to enter a code. The technician tests whichever route the model provides, shows the low-battery warning, and explains what the lock does if the internet goes quiet.
How the visit goesThe kids get home before you do and the spare key has been lost twice this school year. A keypad they can tap, plus a message to your phone when the door opens, would take a daily worry off the list.
Smart Lock Installation · Mississauga
How the visit goes
- 1
Measuring the door and its holes
Smart locks are built around the standard residential preparation, so the locksmith measures before choosing. Door thickness is usually between 35 and 45 millimetres; thicker doors need an extension kit and very thin ones may need a different model. The large cross bore for the cylinder, the smaller edge bore for the bolt and the backset from the door edge to the centre of the hole are each checked against the new lock's range. A lever set also needs the handing confirmed. Steel and fibreglass doors, doors with a mortise pocket from an older lock, and doors with glass close to the handle each change what will fit and how it is mounted.
- 2
Preparing the door before the lock
Good installations start with corrections, not with the new box. If the bolt was dragging, the locksmith tightens or replaces hinge screws with longer ones that reach the framing, shims a hinge to lift a dropped door, and dresses the strike pocket so the bolt has room to seat fully. Weatherstrip that pushes the door out of square is trimmed or repositioned. If the existing holes are undersized for the new lock, they are enlarged with a hole saw and a jig so they stay centred; if a mortise pocket from an old lock is in the way, it is filled and re-drilled. The door is then closed and the bolt tested by hand before any electronics are unpacked.
- 3
A cleaner handover at the next turnover
For a rental or a shared home, the real payoff arrives at the next change of occupant. Instead of collecting keys and wondering about copies, you delete the departing tenant's code, add one for the incoming tenant and confirm the change in the app. The small register the locksmith helped you start shows who still has access and which codes are due to expire. Any guest, cleaner or contractor codes that belong to the old arrangement go at the same time. The override key stays under your control and is handed over or rekeyed as the tenancy rules and your own preference require, so the door changes hands with nothing left behind.
In the van
- Hinge shims and long hinge screws
- Smart deadbolt or smart lever set
- Reinforced box strike with long screws
- Mechanical override cylinder and repinning kit
- Manufacturer-specified batteries
What affects the quote
- 1
Supplying the lock yourself
If you have already bought a lock, the quote covers fitting and setup only, with a note on whether the chosen model suits your door; if the locksmith supplies it, the hardware is listed alongside.
- 2
Storm door and weather adjustments
Where the entrance calls for a vented storm door panel, a keypad shield or a model rated for heat and cold exposure, those items are named separately so you can choose them or not.
- 3
Type of smart lock chosen
A keypad deadbolt, a Bluetooth model, a Wi-Fi model with a built-in radio or a lock that joins a home hub each sit at a different point on the hardware side of the quote, before any labour is counted.
Same fees day, night or weekend.
Smart Lock Installation: questions
Fingerprint, fob, code or phone: which is worth having?
It depends on who uses the door. Codes suit everyone and need nothing in hand. Fobs or cards are a favourite for children and for anyone who finds small buttons difficult, since a tap does it. Fingerprint readers are convenient for a household of adults but can be fussy with cold, wet or gloved hands in winter, so pair them with a code. Phone control is for whoever wants alerts and remote checks. Most families end up using two of these.
Do I still get a key?
In most cases, yes. The majority of keypad deadbolts keep a conventional cylinder behind or beside the keypad, and the locksmith rekeys it during the visit so a fresh key works and the old one is retired. A few designs have no keyway at all and rely on the keypad plus an emergency power contact instead. Which you prefer is part of choosing the model, and either way the fallback route is tested before the locksmith leaves.
How long does a smart lock installation take?
Plan on part of a morning or afternoon for one door. A straightforward swap onto a well-fitting door with the standard holes is the shorter end; a door that needs alignment work, holes enlarged or a mortise pocket filled takes longer, as does joining the lock to Wi-Fi and setting up several user codes. If other doors are being rekeyed to match the override key, add time for each cylinder.
Smart Lock Installation near you
Peel, Ontario
Mississauga information
- Town
- Mississauga, Peel, Ontario
- In business
- 12 years
- Hours
- Open 24/7 · nights, weekends and holidays, same fees
- Phone
- (289) 805-7422
- Visits
- On-site assessment preferred. Request a visit or call.
What the census means at the door
38%
Homes of every age. About 38% of homes in Mississauga were built in 1980 or earlier, according to the 2021 Census.
In an area of varied housing ages, rekeying is the one job that fits every door. Old cylinders and new ones both take fresh pins, so a household moving into either kind of home can start with keys that nobody else holds.
37%
Single-detached houses make up about 37% of homes in Mississauga (2021 Census).
Attached housing turns over more often than detached, so rekeying between tenants or owners is a constant. Because suite doors tend to be standard, the job is usually a straightforward pin change and a fresh set of keys cut on site.
Open 24/7
Request a visit
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into.
Call now · open 24/7(289) 805-7422- On-site assessment preferred
- Same fees day, night or weekend
- 12 years in business